| Service | Typical Range |
|---|---|
| Two-car driveway | $100–$200 |
| Patio or pool deck | $100–$250 |
| Full house wash (soft wash) | $250–$600 |
| Oil stain / degreasing (add-on) | $50–$100 |
Typical Dallas–Fort Worth market ranges — not binding quotes. Call (214) 307-2127 for your free estimate.
Pressure Washing Pricing by Surface
Pressure washing in Frisco is priced by surface type and square footage rather than a flat house rate, because concrete, brick, siding, and stone each require different equipment settings, chemistry, and time. A standard two-car Frisco driveway runs $100 to $200, patios and pool decks typically fall between $100 and $250 depending on material and size, and a complete house wash — soft washing all exterior walls — ranges from $250 to $600 based on home size and story count.
Frisco's dominant exterior mix of brick and stone veneer with cement-board accents responds best to soft washing at the walls and controlled surface-cleaner work on flatwork. Quotes that treat every surface at the same pressure setting are a warning sign, not a bargain.
What Makes a Frisco Job Cost More or Less
Three conditions move Frisco pressure washing quotes: clay soil staining, organic growth, and petroleum stains. DFW's red-brown clay tracks onto driveways and walkways from lawns and construction traffic and requires hot water with the right chemistry — cold-water rental machines tend to spread it rather than remove it. North-facing surfaces and shaded fence lines carry algae that needs a pre-treatment dwell before washing. Oil and tire-mark removal on driveways is typically quoted as an add-on because degreasing is a separate chemical step.
Bundling surfaces in one visit lowers the effective price per surface — the equipment setup, water supply, and chemistry staging happen once instead of across multiple trips, and most companies including Blues Home Services price multi-surface visits accordingly.
Getting an Accurate Quote
The fastest way to an accurate pressure washing price in Frisco is a photo of each surface plus rough dimensions — driveway bays, patio footprint, and home square footage. Beware of flat-rate door-hanger offers that exclude pre-treatment or degreasing; the visible result on stained concrete comes from the chemistry step, not the pressure alone.
Blues Home Services carries full commercial liability insurance and quotes every Frisco job by surface, in writing, before work begins. Call (214) 307-2127 for a free estimate on any single surface or a whole-property package.
Matching Method to Material
Surface material dictates method — the pressure and chemistry that strip years of grime from a driveway would gouge stucco, splinter wood grain, and blow out aging mortar. Our crews carry both dedicated surface cleaners for flatwork and soft-wash systems for vertical and delicate surfaces, switching methods within a single job as the material changes. Done correctly, the cleaning is invisible in the best sense: surfaces simply look new again, with no marks that give away how it happened.
What Actually Drives the Price
There is no meaningful flat rate for this work: two properties on the same street can differ by half depending on square footage, buildup, and how the crew reaches the surfaces involved. A surface maintained on schedule costs meaningfully less per visit than one restored after years of neglect — the buildup curve is not linear. Estimates are free whether you book or not, and pairing compatible services in one visit is the most reliable way to bring the per-service cost down. The most expensive quote is often the vague one: a low number with undefined scope leaves every hard part of the job open to a change order.